Servodrives / inverters series COSMOS 301X Installation, use and maintenance manual - EN
5.10 Removable operator interface (HMI)
Some versions of servo-drive/inverter of the COSMOS 301X series are pre-arranged for accepting a VISIO
3000 removable operator interface, for the parametrization of the servo-drive and for reading error codes. It
consists of a 2-line, 8-character alphanumeric display and 4 arrow keys; a special seat for snapping in the
interface and its HMI port is provided on the servo-drive front side.
Ver. 1.09 SMITECdd 63/74
To Next Page
Loading...