38
8. Cleaning, maintenance and expected life
Cleaning
As you use the RENASYS™ GO device, your healthcare provider should
clean it on a regular basis to ensure good hygiene. The device may be
wiped clean with a diluted bleach solution [5mL (1tsp) bleach to 1L (.26gal)
water], wiped again with a damp cloth using clean water, and dried with a
clean cloth to ensure the device does not remain wet.
Maintenance and expected life
Your healthcare provider will ensure the device has been properly
maintained prior to use. Your device should last the duration of your
therapy. If a replacement is needed, your healthcare provider will provide
the items needed.
9. Technical specifications
Environmental conditions
Storage and Transport 14 to 131°F / -10 to 55°C
Operational Temperature 41 to 95°F / 5 to 35°C
Relative Humidity 30% to 70% RH
Atmospheric Pressure 700 mbar to 1,060 mbar
The time required for the device to warm
from 14°F / -10°C storage temperature until
the device can be used.
40 minutes at 68°F / 20°C
The time required for the device to cool from
131°F / 55°C storage temperature until the
device can be used.
56 minutes at 68°F / 20°C
Ingress protection: IP 22
The device housing is designed to protect its internal components from
a moderate level of external debris or small objects and falling water
(e.g. light rain).
To Next Page
Loading...
