6
Features and Controls Controls and Connections
3.2 Controls and Connections
Item Name Description/Operation
1
Battery Charge
Indicator
The battery charge LED indicator illuminates red when the battery is being
charged. The LED will turn green when battery is fully charged.
2
microSD (Secure
Digital) Card
The microSD card stores saved images, videos, and expert tips content.
During operation the microSD card must be installed to save and view
images/videos, and view expert tips.
3 micro USB Jack
The micro USB jack provides connection (via supplied USB cable) for the
power supply adapter (battery charging), and to a personal computer for
saved image transfer.
Protective Cover
(Item 8 in Fig. 2-1)
A protective cover is used over the USB jack and microSD card slot, located
on top of the Imager. Always keep the protective cover closed during
operation. Only open the protective cover during battery charging, or when
connecting to the PC, or removing the microSD card. Opening the protective
cover during operation could result in an electrostatic discharge event that
may cause the Thermal Imager to reset. If this occurs, the Thermal Imager
will reset and return to normal operation without being damaged.
4Trigger Pull to capture an image of the active display, or start/stop video recording.
5
Video Capture
and
Cancel (No)
Button
Dual Function
Live Mode - press to start/stop video recording mode. See Special
Button Functions (Live Mode) on page 9.
Menu Mode
- use to close a menu, and or return to the previous
menu or screen.
6
LED Spotlight
and
Accept (Yes)
Button
Dual Function
Live Mode
- press to turn the LED spotlight on/off. See Special
Button Functions (Live Mode) on page 9.
Menu Mode
- press to confirm, or select a menu option.
7 Menu Button Press to open the main menu.
To Next Page
Loading...