62
Chapter 10 Maintenance
10.1 Main Topic Links
The following topics are described in this section:
– Storage
– Cleaning
– Battery Pack
- Safety Guidelines
- Battery Charging
- Removal / Installation
- Ordering a Replacement Battery
- Disposal
10.2 Storage
To protect your Thermal Imager, store it in safe area free from dust, moisture and excessive
temperatures.
• Only store the Thermal Imager in dry areas, at room temperature.
• During extended periods of non-use (long storage) remove the battery from the Thermal
Imager.
10.3 Cleaning
Periodically perform the following tasks to keep your Thermal Imager in proper working order:
• Check the housing, display, and controls for dirt and damage before and after each use.
• Clean the Thermal Imager housing and display screen with a damp soft cloth and a weak
detergent cleaner.
Do not use paper towel or other paper type materials to clean the display screen.
Do not use any abrasive cleansers or automotive chemicals.
Only use cleaning solution specified for cleaning commercial digital camera lenses to clean the
thermal imager and visible light lenses. Use extreme care when cleaning the lenses. Only use a
cotton wool applicator and avoid touching the lens with your fingers. Oil or debris from your fingers
may damage the lenses.
To Next Page
Loading...