14
Operation Basic Operation (Live Mode)
4.4.6 Using Visual Light (Camera) Mode
Visible Light Mode displays objects at 0% thermal overlay opacity. This mode displays objects
similar to a standard visible light digital camera.
See Startup / Shutdown (On/Off) on page 8 for startup and battery charging information.
After startup, the default screen is displayed, see Default Screen Features on page 7 for
feature and icon descriptions.
1. Press the Down control button repeatedly until 0% is displayed under the opacity icon.
The imager is now in Visual Light Mode (0% opacity).
2. Point the imager at the desired object(s).
Figure 4-2
Visual Light Mode - Operation Options
• Pull the Screen Capture Trigger to save an image of the active screen. See Capturing and
Saving Images on page 32 for additional information.
• Press the N button to start/stop video recording. See Recording and Saving Video on page 33
for additional information.
• Press the Y button to turn on/off the LED Spotlight, see Using the LED Spotlight on page 17.
• To change view settings (e.g. zoom, picture-in-picture, split-screen) see Changing View
Settings (Live Mode) on page 10.
• See Settings on page 18 for information on all device settings.
To Next Page
Loading...