13
Operation Basic Operation (Live Mode)
Typical examples (rear window defrost) of the overlay level settings are shown below
Overlay Mode - Operation Options
• Pull the Screen Capture Trigger to save an image of the active screen. See Capturing and
Saving Images on page 32 for additional information.
• Press the N button to start/stop video recording. See Recording and Saving Video on page 33
for additional information.
• Press the Y button to turn on/off the LED Spotlight, see Using the LED Spotlight on page 17.
• To change view settings (e.g. zoom, picture-in-picture, split-screen) see Changing View
Settings (Live Mode) on page 10.
• To change the emissivity settings, see Emissivity on page 29. for additional information.
• See Settings on page 18 for information on all device settings.
• The thermal image is displayed using the color palette selected to define object temperatures.
Use the color palette range indicator to determine the temperature of objects within the
thermal image. To change the color palette settings, see Color Palette on page 24 for
additional information.
Use the Up / Down control buttons to toggle through the different overlay settings.
20% Overlay 40% Overlay
60% Overlay 80% Overlay
To Next Page
Loading...