9
Operation Connecting to Wi-Fi (ALTUSDRIVE.com)
4.3 Connecting to Wi-Fi (ALTUSDRIVE.com)
The Diagnostic Thermal Imager (DTI) includes a built-in Wi-Fi feature that automatically transfers
captured images to ALTUS™, our cloud-based application designed specifically for technicians to
store, organize and share thermal image diagnostic information. See Wi-Fi Connection on
page 20 and ALTUS (ALTUSDRIVE.com) - Image Sharing/Storage on page 41 for additional
information
4.4 Basic Operation (Live Mode)
Upon initial startup (after introductory screen fades) the device switches to Live Mode and
displays the Default Screen, see Default Screen Features on page 7. Live Mode is the primary
operational mode and allows you to take temperature measurements, capture still images, and
record video in various view modes (e.g. visible light, overlay and full thermal).
Mode Description:
• Visible Light - displays objects similar to a standard visible light digital camera, see Using
Visual Light (Camera) Mode on page 14.
• Overlay - displays objects using visible light with a transparent thermal image overlay, see
Overlay Mode - Operation Options on page 13.
• Full Thermal - displays objects as a full thermal image only, see Using Full Thermal Mode on
page 12.
4.4.1 Special Button Functions (Live Mode)
When in Live Mode, view settings can be quickly changed using the control buttons as shortcut
buttons. The following table describes the special functions of the control buttons when in live
mode.
Button Live Mode Special Button Operations
Video Recording - Enable / Disable video recoding mode (see Recording and Saving
Video on page 33)
LED Spotlight - On / Off (see Using the LED Spotlight on page 17).
View Setting Options -
Use the Left / Right control buttons to toggle through the
settings. See Changing View Settings (Live Mode)
on page 10.
Overlay Setting Options - (20 to 80% in 20% increments)
Use the Up / Down control
buttons to toggle through the settings. See Overlay Mode - Operation Options
on
page 13
To Next Page
Loading...