43
ALTUS (ALTUSDRIVE.com) - Image Sharing/Storage Registration - Getting Started
8.4.2 ALTUS - SureTrack User Setup
z If you already have a SureTrack account, follow these steps to register and setup your
ALTUS account:
From a PC or mobile device:
1. Connect the thermal imager to a Wi-Fi network, see Wi-Fi Connection on page 20.
2. Write down the Serial Number, PIN and Code that are displayed when the device connects to
the Wi-Fi network, or leave the screen displayed. Codes can also be found in the Settings
menu, see ALTUS Setup on page 23.
3. Using a mobile device or PC, visit https://ALTUSDRIVE.com and select Login (upper right
screen).
4. Log in using your SureTrack Username and Password.
5. Open the Profile Manager (additional login may be required).
6. From the Device Management tab, select Add Device.
7. Enter your Serial Number, PIN, Code, and Device Name.
8. Log out of Profile Manager, then select the ALTUS Home Page browser tab to get started.
9. Turn the thermal imager off, and then on.
10. See Using ALTUS.
Your Diagnostic Thermal Imager is now registered to your ALTUS online account. Images will be
automatically sent (only when connected to Wi-Fi) to your online account from the device.
i If the device is not connected to a Wi-Fi network when the images are taken, they will not be sent
to the ALTUS account. Wi-Fi connection is required to upload the images to ALTUS.
To Next Page
Loading...