Snap-On ELITE - Live Mode Screen Elements

7
Features and Controls Default Screen Features
3.3 Default Screen Features
The default screen is a Live Mode screen and is displayed upon initial start up. See Basic
Operation (Live Mode) on page 9 for additional information.
NOTE:
i Opacity and view settings are saved when the thermal imager is turned off, allowing you to resume
operation with the same settings last used.
1. Opacity Percentage Icon, see Using Overlay Opacity Mode on page 12
2. Zoom Level Icon, see Changing View Settings (Live Mode) on page 10
3. Wi-Fi Icon, see Wi-Fi Status - Icon Identification on page 22
4. Battery Level Icon
5. Center Region Temperature (Average)
6. Target (Center Region Temperature (Average))
7. Menu Indicator Tab
8. Color Palette - Maximum Temperature Value
9. Color Palette Range Indicator
10. Color Palette - Minimum Temperature Value
Figure 3-2 Default Screen Features
8
Up / Down
Control Buttons
{Directional}
Dual Function
Live Mode
- press to change the overlay opacity setting. See
Special Button Functions (Live Mode) on page 9.
Menu Mode - press to navigate up / down in menu options.
9
Left / Right
Control Buttons
{Directional}
Dual Function
Live Mode
- press to change the view setting. See Special Button
Functions (Live Mode) on page 9.
Menu Mode
- press to navigate left / right on the toolbar, and in
menu options.
10 Power Button Press to turn the thermal imager on/off.
Item Name Description/Operation