Snap-On ELITE - Getting Started with ALTUS Registration

42
ALTUS (ALTUSDRIVE.com) - Image Sharing/Storage Registration - Getting Started
IMPORTANT - If you are a new owner of this tool, you must register this device with your ALTUS
account in order to transfer files to your ALTUS account. If you do not register the device with your
ALTUS account, captured files will be sent to the previous owners ALTUS account. If you do not
have an ALTUS account, see Registration - Getting Started on page 42.
8.4 Registration - Getting Started
To use ALTUS:
• The thermal imager must be connected to a Wi-Fi network
• Registration is required online
– If you are a new user, you will need to create a new account, see ALTUS - New User
Registration.
– If you already have a SureTrack
®
account, see ALTUS - SureTrack User Setup.
8.4.1 ALTUS - New User Registration
z If you are a new user, follow these steps to register and create a new account:
NOTE:
i Account setup is only required one time.
1. Connect the thermal imager to a Wi-Fi network, see Wi-Fi Connection on page 20.
2. Write down the Serial Number, PIN and Code that are displayed when the device connects to
the Wi-Fi network, or leave the screen displayed. Codes can also be found in the Settings
menu, see ALTUS Setup on page 23.
3. Using a mobile device or PC, visit https://ALTUSDRIVE.com and select Create Individual
Account from the Login screen.
4. Enter the required information and create a Username and Password, then select Create.
5. At the “Success” confirmation screen, select Done.
6. Log in using your Username and Password.
7. Answer the security questions, then select Submit.
8. From Technician Profile Manager select the Device Management tab.
9. Select Add Device, then enter your Serial Number, PIN, Code, and Device Name and select
Save when done.
10. Log out of Profile Manager, then select the ALTUS Home Page browser tab to get started.
11. Turn the thermal imager off, and then on.
12. See Using ALTUS.
Your Diagnostic Thermal Imager is now registered to your ALTUS online account. Images will be
automatically sent (only when connected to Wi-Fi) to your online account from the device.
NOTE:
i If the device is not connected to a Wi-Fi network when the images are taken, they will not be sent
to your ALTUS account. Wi-Fi connection is required to upload the images to ALTUS.