58
Tools Tools Menu
Figure 8-4 Sample calibration screen
4. Touch the box as directed.
The box goes away and reappears on a different area of the screen.
5. Repeat Step 4 each time a new box displays.
i The display returns to the Settings menu once the screen calibration procedure is complete.
Time Zone
This option opens a menu of time zone settings. Scroll to highlight, then select the local time zone.
The display returns to the Settings menu once a time zone is selected.
Clock Settings
The system clock setting screen opens when this option is selected from the Setup menu
(Figure 8-9).
TOUCH SCREEN CALIBRATION
WARNING: Do not power the tool off until the Touch
Calibration has been completed successfully.
TAP BOX IN UPPER LEFT CORNER
To Next Page
Loading...
Need help?
General
