Snap-On PLASMA60i User Manual

3
Risk of Electrical Shock
WARNING
• Electrical shock can result when contacting
live electrode or internal components
• Electrical shock can result from absence of
grounding prong
Do not touch electrode or internal components
without protection.
Disconnect power before servicing.
Do not remove the grounding prong in any
electrical plug.
Electrical shock can cause injury
Risk of Explosion
WARNING
• Plasma cutting causes sparks that can cause
explosion
Use caution and proper procedures when
welding.
Avoid sparks if gasoline vapor and other fuels
are present.
Electrical shock, flames and explosion can cause
serious injury
Electrical and Magnetic Fields
WARNING
• Plasma cutting may cause localized Electrical
and Magnetic Fields around cables and power
sources
• The magnetic fields created by high currents
may affect the operation of medical
equipment.
Route the electrode and work cables together.
Do not place your body between the
electrode/torch and work cables.
Never coil the electrode/torch lead around
your body.
Do not work next to welding/cutting power
source.
Electrical shock and Magnetic fields can cause
injury.
Disposal of Equipment
IMPORTANT
• Disposal of electrical equipment can be
hazardous to the environment
Contact local regulations prior to disposal
Improper disposal can cause an environmental
hazard
SAFETY INFORMATION cont’d

Snap-On PLASMA60i Specifications

General

Brand	Snap-On
Model	PLASMA60i
Category	Welding System
Language	English