• Inverter Technology – Features a small yet powerful package size that allows for portability in a
variety of situations in the shop or on the job site.
• Material Capability – Ideal for cutting a variety of ferrous , non-ferrous and high strength materials.
• Cutting Capacity – Cuts a maximum of 3/4” and will sever up to 1”
• Amperage Range Control – Adjustable amperage range from 20-55 Amps with provides the ability
to minimize distortion on thinner materials.
• Depth-of-Cut Adjustability – For applications where the top layer of material is cut without
disturbing the base layer.
• Input Voltage Versatility – Accepts 208V or 230V input power supply voltages at minimum current
requirements.
• Pilot Self-Restart Function – Provides the ability to cut perforated, grid or expanded metal
applications.
• Air Supply System – Contains an air filter and pressure regulator to allow for either a compressed
air or nitrogen air supply.
• Protection – LED warning system for low air pressure, high temperatures and system blockages.
• Included Accessories – Includes power supply, torch assembly, ground cable and spare torch
consumables.
• Technical Support – Industry-leading technical support of over 30 years of experience by calling
800-ABC-WELD to speak with a live expert.
To Next Page
Loading...
Need help?
General
