EasyManua.ls Logo

Snom d745 - Page Toggle Key; Freely Programmable Function Keys with Leds; Function Key Label Screen (Second Screen)

Snom d745
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
D745 User Manual Getting to Know Your Phone
Hold key. See "Hold" on page 54 for further information.
Turn "do not disturb" (DND) mode on and o for all identities registered on the phone
(Fig. 1). If you want to turn on DND for one or more, but not all of the identities (Fig. 2),
use the identity settings on the phone's web user interface. In DND mode incoming calls
do not ring; callers hear the busy signal.
Exception:
Phone numbers on your directory's VIP list (see "Contact Types" on page 41)
.
When DND is on, you'll see the DND symbol on the display.
Fig.1 - DND active for all identities Fig. 2 - DND active for one of the configured identities
Audio Control Keys
Press the right or left edge of the key to adjust the volume
of the ringer when the phone is idle or ringing
of the loudspeaker in handset, casing, or headset, respectively, when in call
Muting and unmuting the microphone
Toggling between handsfree and handset mode
Dialing numbers on speakerphone
Accepting calls on speakersphone
Toggling between headset and handset modes.
Note: Handset mode overrides headset mode. When the handset is picked up, the
headset symbol in the status line will be replaced by the handset symbol, indicating
that you can now use only the handset for the call. The phone will return to headset
mode when the handset is placed in the cradle, and the headset symbol will reappear
in the status line.
Page toggle key
Page toggle key for function key screen (second screen). Press the top or bottom rim of
the key to put the next "page" of four key label "pages" on screen.
Freely programmable function keys with LEDs
These 4 x 8 = 32 freely programmable function keys can be programmed and labeled on the phone
and on the Function Keys page of the phone's web interface. For information on how to map functions
onto these keys, see "Configuring the function keys" on page 65. The factory default setting is line.
Function key label screen (second screen)
The phone has a second screen where the labels of the freely programmable function keys are
displayed on four (4) "pages" with two rows of four (4) labels each. The top row is associated with
the top row of LED function keys, the bottom row with the bottom row of LED function keys. The four

Table of Contents

Related product manuals