Snom d745 - Turning Forwarding of All Calls On;Off with a Function Key

64
D745 User Manual Using the Phone
Turning forwarding of all calls on/o with a function key
Turning call forwarding on
NOTE: Call forwarding is set for each configured identity separately. When the setting
is done on the phone, it applies to the identity selected as outgoing identity.
1. Press
. The display will show the Target when Forwarding screen.
Note: If the function key
is not available when the display is in idle mode, you
can make it available on the Function Keys page of the phone's web interface. For
further information see "Configuring the function keys", "Example 4, Changing setting of
context-sensitive key" on page 72. Default settings: See "At a glance" on page 18.
2. If no forwarding number has been set or if it needs to be changed, make the necessary entries.
3. Press
. The symbol is now crossed o: .
Turning call forwarding o
Press the function key underneath
.