Snom D7C - Configuring Function Keys; Phone Configuration: Font and Alignment; Phone Configuration: Function Settings

15
Snom D7C User Manual Conguring the function keys
Configuring the function keys
The function keys on the expansion module are congured and work like the SmartLabel keys with
LEDs on the D717, D735, and D785 and the function keys with LEDs on the D765. The settings are
stored on the respective phone and remain stored there when the expansion module is disconnected.
They are not shown in the phone's settings when no expansion module is connected. If the expansion
module is replaced by another module, the settings will by used by that module.
The keys on the D7C are freely programmable function keys. See the phone's manual, chapter
Conguring the function keys, for the description of the settings and how to congure them. You can
download the manual at https://service.snom.com +.
Conguration on the phone
Font size and text alignment
The font size of the upper (MainText) and lower (SubText) text lines can be adjusted separately.
DND
O 
DND
On
Extension
Joe Miller
Extension
1236
Joe Miller
Joe Miller
1236
Line
Free
Extension
1234
Extension
1234
Extension
1234
Extension
1234
Free
Line
Free
Line
Free
Line
Free
1. Press to open the Settings menu of the phone that the module is connected to.
2. Open the Preferences menu.
3. Open the Display menu.
4. Open the Expansion Modules menu.
5. Open Appearance.
6. Select the UXMC expansion module.
7. Select the font size for the top line (Maintext size) and the bottom line (Subtext size). The defaults
are XL and S, respectively.
8. Select the text alignment. The default is left-aligned.
9. Press for 3 seconds to return to the idle screen.
Function settings
1. Press to open the Settings menu of the phone that the module is connected to.
2. Open the Preferences menu.
3. Open the Fkeys menu.
4. Select the UXMC expansion module.
5. Select Page 1, 2, or 3, respectively, by scrolling to the respective page and pressing .
6. Select a key and press to open the Key # Function menu. The selected key ashes yellow if the
SmartLabel key page with the key to be congured is on-screen (press to page).
Main Text
Sub Text