Chapter 8 – Prestart Inspection
S1930E/S1932E/S2632E – 1360460 35
Prestart Inspection Checklist
Item Inspect For OK
Operator’s Manual In manual holder, all pages readable and intact
Electrical System
Battery uid level Proper level
Battery terminals Clean, connectors tight
Battery charger Proper operation
Cables and wiring harness No wear or physical damage
Hydraulic System
Fluid level Between full and add marks with platform stowed
Hoses, tubes and ttings No leaks, all ttings tight
Free-wheeling valve Fully closed
Tires and Wheels Good condition
Ground Strap In place and securely fastened
Lower Control Station
Operating controls Proper operation
Emergency stop Shuts off lower controls/proper operation
Lowering alarm Sounds when platform lowers
Pothole Protection Interlock Proper operation
Emergency Lowering Proper operation
Safety Prop No damage or deformation
Flashing Light Proper operation
Structures
Weldments – Chassis, platform, etc. Welds intact, no damage or deformation
Slide blocks In place, no damage or deformation
Fasteners In place, tight, and no damage
Upper Control Station
Guardrail system Welds intact, no damage or deformation
All fasteners in place, no loose or missing parts
Platform extension Proper operation, no damage or deformation
Fold down rails Fasteners in place, proper operation
Brakes Proper operation
Operating controls Proper operation
Emergency stop Shuts off upper controls
Lowering alarm Sounds when platform lowers
Drive motion alarm Sounds when aerial platform drive function is operated
Battery condition indicator Proper operation
Horn Sounds when activated
Placards and Decals In place and readable
To Next Page
Loading...
