EN
ATYSp - 542001E - SOCOMEC
• Run the program on your computer and follow the instructions so as to install the Software. Once installed,
open the software by clicking on: Start -> All Programs -> Socomec -> EasyCong. The software is best
viewed with a resolution of 1280 x 1024
• Select your language from the drop box on the top, right hand side of the screen.
• A user with rights may change prole and access advanced settings by clicking on “Change Prole”
This allows to select a prole from a User / Administrator / Super User / Socomec.
The SOCOMEC prole is only available for SOCOMEC internal use.
Change of prole will require a password that may be set by the User
Profile Functionsthatmaybeperform PasswordbyDefault
User 1. User can add a device in the Easy Cong Tool.
2. User can get the conguration from a device.
3. User can create a new conguration for the device.
No password is required for
this prole
Administrator 1. All the function that a user can perform +
2. User can send conguration to the device.
3. User can delete a declared device.
4. User can update the device connection parameters.
Password by default :
SocoAdm
Super User 1. All the function that Administrator can perform +
2. The User can change and save the passwords for the
Administrator and the Super User.
Password by default :
sOcOmec
Socomec 1. Not Used Not Used
RefertospecificEasyconfiginstructionmanualonwww.socomec.comfordetailsregarding
EasyConfigProgramming.
To Next Page
Loading...
Need help?
General
