11EN
COUNTIS E23/E24 - 545877A - SOCOMEC
7. MID COMPLIANCE
The following points must be taken into consideration to ensure that the device is used in compliance with directive
MID 2014/32/EU:
• Type of network
COUNTIS E24 meters comply with the MID directive for connection to networks: 3P+N (see "6.2. Connection
to the electrical network and to the loads", page 10)
• Fitting terminal covers
After connecting the device, ensure that the terminal covers are tted properly and secured by the plastic
seals provided with the device.
• Locking the program button
Make sure the SET program button is locked after tting the terminal cover.
• RS485 communication
The information provided via the RS485 COM is transmitted for information only and has no legal value.
• MID Declaration of Conformity
The MID Declaration of Conformity is available on the website: www.socomec.com/en/countis-e2x
MID
seal
To Next Page
Loading...
Need help?
General
