15EN
COUNTIS E23/E24 - 545877A - SOCOMEC
9.1.2. View all of the menu "SETUP 2"
In the SETUP 2 menu, press " " for 3 seconds to put the device into programming mode.
You can go to the different screens by pressing "
":
>3s
Communication address
Communication speed
Communication parity
Communication stop bit
Reset partial energy to zero:
Ea+ partial (kWh) Tariff T1, T2
Ea+ partial (kWh)
Ea- partial (kWh) Tariff T1, T2
Ea- partial (kWh)
Eap partial (kVAh)
Er+ partial (kVarh)
Er- partial (kVarh)
Return to the rst menu screen, "SETUP 2"