socomec COUNTIS ECi2 - Configuration

10
COUNTIS ECi - Ref.: 538 470 A
CONFIGURATION
To enter conguration mode, press the PROG key for 3 sec.
You are asked for a code:
• Normal user: code 1000 (default value, congurable number): all parameters can be modied EXCEPT
those locked by the code 6825.
• Advanced user: code 6825 (not congurable): allows access to all parameters accessible with the code
1000, as well as sensitive "maintenance" parameters: Factory settings and Input Reset.
After 1 min if a key is not pressed = automatic exit from programming mode.
The configuration is not saved.
To save and quit programming mode, press and hold PROG.