3
COUNTIS ECi - Ref.: 538 470 A
HAZARDS AND WARNING
Qualified personnel and correct operation
The equipment described in this document may only be installed, commissioned and operated by trained,
qualified personnel. Failure to follow the procedures given in these instructions does not imply liability on
the part of the manufacturer.
Standards, directives, legal provisions and local regulations must be complied with.
Risk of electrocution, burns or explosion
• before working on the device, isolate all dangerous live components,
• always use an appropriate voltage detection device to conrm the absence of voltage,
• replace all components, doors and covers before reconnecting this device to the power supply,
• always use the appropriate specied voltage to supply this device.
Failure to comply with these precautions could result in serious injuries.
Risk of damage to the device
Ensure the correct:
• voltage across the AUX SUPPLY power supply terminals, 110- 400 Vac / 50-60 Hz,
• voltage across the OUTPUT relay, 250 Vac or 30 Vdc.
For the safety of personnel and equipment, it is essential to read all of these instructions before using the
device for the first time.
Conrm the following points upon receipt of the package containing the COUNTIS ECi :
• the packaging is in good condition,
• the product is in good condition,
• the device part number matches that specied on your order,
• the contents of the package:
1 product,
1 resistance for line impedance ref: 48990019,
1 mini CD,
1 quick start instructions.
INITIAL CHECKS
To Next Page
Loading...
Need help?
General
