35EN
MASTERYS BC+ 10-40 kVA - IOMMASBCXX0G-EN 02 - SOCOMEC
8.4.6 CONTROLS menu
This menu contains the controls that can be sent to the UPS. Some of them are password protected. If a command is
not available, a COMMAND FAILURE message appears.
• PROCEDURES: START PROCEDURE/MAINT. BYPASS PROC./STOP PROCEDURE see 'Operating procedures'
chapter.
• BATTERY: BATTERY TEST: this function checks whether or not test conditions are available then returns the results.
• ECO MODE: ON/OFF: this function sets/resets the ECO MODE.
• MAINTENANCE: ALARMS RESET: this function clears the alarm history, LED TEST: this function activates the LED by
flashing for few seconds.
8.4.7 USER PARAM menu
This menu contains all the machine settings such as language, date and buzzer.
To reset the language back to English, press the ESC button for 5 seconds.
System critical parameters are password protected and should be changed by specialist personnel only.
8.4.8 SERVICE menu
This menu is reserved for support service personnel and holds UPS identification data and utilities for software upgrades.
The Commissioning Code is provided directly by the reference Support Centre upon communication of the serial
number. When contact is made with the Support Centre for the Commissioning Code, detailed information can be obtai-
ned on the UPS functions available and on regular preventive maintenance programmes.
• UPS SETTINGS: critical machine settings for output, batteries and backfeed.
Some parameters cannot be modified when the UPS supplies the load by INVERTER or BYPASS.
Wrongly configured UPS SETTINGS could damage the load or batteries.
To Next Page
Loading...
