46 EN
MASTERYS BC+ 10-40 kVA - IOMMASBCXX0G-EN 02 - SOCOMEC
11.6 Remote touchscreen display
NOTE!
Available only with ADC+SL option card.
11.7 PROFIBUS protocol interface
Socomec UPS can be provided with an interface of PROFIBUS ® DP slave type for the UPS to be connected to a
PROFIBUS ® PLC.
PROFIBUS ® protocol is aimed at exchanging data between input/output monitoring devices and a master unit.
The frame exchanged with the PLC only manages input data comprising a maximum of 255 bytes. Controls that are
considered as output data are not managed by means of the PROFIBUS ® coupler.
11.8 Software option
Visit www.socomec.com and enter DOWNLOAD > SOFTWARE > UPS SOFTWARE to find the communication software
suitable for your requirements.
NOTE!
Before performing any operations, check that the software is compatible with your UPS model.
11.9 Internal Backfeed Protection
Internal backfeed protection for Mains and Auxiliary Mains.
For further information contact SOCOMEC.
11.10 External maintenance bypass
The external maintenance bypass is designed to provide maximum system availability for critical equipment. It offers the
possibility of transferring the load to an alternative power path allowing full isolation of the UPS. In this case the UPS can
be turned off and removed without power interruption at the connected loads.
For further information contact SOCOMEC.
To Next Page
Loading...
