16
USER MAINTENANCE GUIDE
CHECKING BEFORE CESSIONS
Keep go-kart in original configuration
Use spare parts of Sodikart origin
This document can not be reproduced or released without the Sodikart authorization.MAN.GT4.EN.01
Feeding
Check that the fuel hoses and the tank do not leak and that
hoses are well connected to the tank, carburettor, fuel
container, fuel filter and fuel pump.
Drive belt
Legend
1 Notched belt
2Roller
• Check that the drive belt is tightened, and in a good
state. It prevents mechanical damages.
• Tighten the notched belt (1) with the roller adjuster (2).
The notched belt must have 5mm allowance.
For tension of the notched belt, (Cf. chap. 4.7).
If fuel has been spilled, clean and wait for fuel
vapours to be dissipated before starting the go-kart.
Tighten the notched belt daily. Good tension increases
the lifetime of the belt.
Replace any damaged belt to eliminate the risk of engine
overspeed.
The engine and the exhaust are sources of heat
which present a risk of burns for the driver. Make sure
that the protections are correctly secured and in a
good state.
The engine and transmission (rear axle included) are
rotation parts which present a risk of serious, even
fatal injury, by winding of long hairs or loosing
clothes. Make sure that the protections are correctly
secured and in a good state.
The engine generates toxic gas emissions. Make
sure that the buildings are ventilated correctly.
A fuel spill can cause accidents or fire hazard.
To Next Page
