Sodi GT4 - Bodywork Parts

18
USER MAINTENANCE GUIDE
CHECKING BEFORE CESSIONS
Keep go-kart in original configuration
Use spare parts of Sodikart origin
This document can not be reproduced or released without the Sodikart authorization.MAN.GT4.EN.01
GT4
3.6 - Bodywork parts
The bodywork parts are essential safety components.
They protect the driver against:
- The rotating parts – risk of entanglement of long
hair and loose clothes.
- The stability under impact - risk of lifting, etc.
- The hot areas - risk of burns.
• Check that the bodyworks parts are not damaged.
• Check the bodywork fixations (1).
• Check the state of protections (2).
Legend
1 Bodywork fixation
2 Protection
1
1
1
2
1
1
1
1
1
1
2
1
1
.
NOTES
 A screw head that protrudes outside the protections will
rapidly degrade the other bodywork parts. Change the
corresponding protection immediately.
WARNING
!
 A rear axle cover which is badly secured or in a bad
state may lead to a serious or even fatal injury, by
winding of long hair or loose clothes around the rear
axle.
 Make sure that the rear axle cover is the good
version.
 A bodywork part with dangerous sharp edges may
lead to a serious or even fatal injury.
 Never allow a go-kart to run with broken or missing
bodywork parts, it may lead to a serious or even fatal
injury.