SOFAR 15~24KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
PV array should be grounded in accordance to the requirements of
the local electrical grid company
Ensure the maximum DC voltage input is less than the maximum
inverter DC voltage (including in low temperature condition). Any
damage cause by overvoltage, SOFARSOLAR will not take the
responsibility including warranty
Signs on the Product and on the Type Label
SOFAR 15~24KTLX-G3 has some safety symbols on the inverter. Please read and
fully understand the content of the symbols before installation.
This is a residual voltage in
the inverter!
After disconnect with the DC side,
there is a residual voltage in the
inverter, operator should wait for 5
minutes to ensure the capacitor is
completely discharged.
Caution of high voltage and
electric shock
The products operates at high
voltages. Prior to performing any work
on the product, disconnect the
product from voltage sources. All work
on the product must be carried out by
qualified persons only.
The product can get hot during
operation. Avoid contact during
operation. Prior to performing any
work on the product, allow the
product to cool down sufficiently
Comply with the
Conformite Euroeenne (CE)
Certification
The product complies with the CE
Certification
This symbol indicates the position for
the connections of an additional
equipment grounding conductor
To Next Page
Loading...
Need help?
General
