BASIC SAFETY INFORMATION
HYD 5K...20KTL-3PH 13
Beware of burning hazards due to the hot housing!
• While the inverter is in operation, only touch the display and
the buttons, as the housing can become hot.
Implement earthing!
• The PV generator must be earthed in accordance with the
requirements of the local power grid operator!
• For reasons of personal safety, we recommend that all PV
module frames and inverters of the PV system are reliably
earthed.
Damage due to overvoltage
• Ensure that the input voltage does not exceed the maximum
permissible voltage. Overvoltage may cause long-term
damage to the inverter, as well as other damage that is not
covered by the warranty!
To Next Page
Loading...
