INSTALLATION
28 HYD 5K...20KTL-3PH
4 Installation
4.1 Installation information
Fire hazard
• Do NOT install the inverter on flammable material.
• Do NOT install the inverter in an area in which flammable or
explosive material is stored.
Burning hazard
• Do NOT install the inverter in places where it can be
accidentally touched. The housing and heat sink may become
very hot while the inverter is being operated.
Weight of the device
• Take into account the weight of the inverter when
transporting and moving it.
• Choose a suitable installation location and surface.
• Commission a minimum of two persons for the
installation of the inverter.
• Do not set down the inverter overhead.
To Next Page
Loading...
