PRODUCT FEATURES
26 HYD 5K...20KTL-3PH
reach 50 A / 70 A. If you connect both battery inputs in parallel, to
increase the charging and discharging current, you can only connect 4
parallel battery systems in total with the same DC voltage (up to 100
kWh nominal capacity).
• If a battery input is unused, ensure to set this in the
inverter's system settings, for example:
System Settings – Input Channel Config – Bat Channel2 –
Not Used.
• Configuration of the battery setup should only be done
when the inverter is in standby mode!
Advanced Settings – 10. Switch on / off – Off
To Next Page
Loading...
