Sofarsolar HYD 5KTL-3PH - Page 50

ELECTRICAL CONNECTIONS
50 HYD 5K...20KTL-3PH
1. Remove the crimp contacts from the positive and negative
connections.
2. Remove the insulation of the cables:
Note: L2 is 2 to 3mm longer than L1
①
Positive DC cable
②
Negative DC cable
3. Insert the positive and negative DC cables into the corresponding
cable glands.
4. Crimp the DC cables. The crimped cable must be able to withstand
a tractive force of 400 Nm.