INSTALLATION
24 SOFAR 1100...3300TL-G3
1. Examine the inverter before installation
2. Prepare the installation
3. Select an installation location
4. Transport the inverter
5. Mount the rear panel
6. Install the inverter
4.3 Examination before installation
4.3.1 Checking the external packaging materials
Packaging materials and components may become damaged during
transportation. Therefore, the external packaging materials must be
examined before the inverter is installed. Check the external
packaging material for damage, e.g. holes and cracks. If you discover
any cases of damage, do not unpack the inverter and contact the
transport company and/or dealer immediately. It is recommended that
the packaging material should be removed within 24 hours before
installing the inverter.
4.3.2 Checking the delivery scope
After unpacking the inverter, check that the delivery items are both
intact and complete. In the event of any damage or missing
components, contact the wholesaler.
To Next Page
Loading...
