ELECTRICAL CONNECTIONS
SOFAR 1100...3300TL-G3 39
Removing the connectors
Danger of DC arcing
• Before removing the plus and minus connector, ensure that
the DC switch has been set to OFF.
In order to remove the plus and minus connection from the inverter,
insert a removal key into the locking and press on the key with the
adequate force as shown in the following illustration:
5.5 Connecting the AC power cables
Connect the inverter to the AC power distributor or the power grid
using AC power cables.
AC connection
• Each inverter must have its own circuit breaker.
• Do not connect any consumers between the inverter and
circuit breaker!
• The AC disconnecting device must be easily accessible.
To Next Page
Loading...
