TROUBLESHOOTING HANDLING
SOFAR 1100...3300TL-G3 73
DC current measurement
error
Grid voltage measurement
error
Bus voltage measurement
error
The output current is not
balanced
The DC bus voltage is too
low
If the configuration of the PV
generator is correct (no ID05 error),
the possible cause may be linked to
insufficient sunlight. The inverter
automatically returns to its normal
operating state when the level of
sunlight is back to normal.
The bus voltage is too high
ID26-ID27 are internal errors of the
inverter. Switch the DC switch OFF,
wait 5 minutes and then switch the
DC switch ON. Check whether the
error has been rectified. If not,
please contact the technical
support department.
The bus voltage is not
balanced