SOFAR 60-80KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
"password error, try again" appears, you will need to re-enter the correct password.
1. Set Time
Set the system time for the inverter.
2. Clear Energy
Clean the inverter of the total power generation.
3. Clear Events
Clean up the historical events recorded in the inverter.
4. Set Safety Para
Long press button, enter interface, save the specific file into USB and insert USB
into inverter communication port.
5. On-Off Control
Inverter on-off local control.
6. Set Energy
Set the total power generation. You can modify the total power generation through
this option.
7. Set address
Set the address (when you need to monitor multiple inverters simultaneously) ，
Default 01.
8. Set Input mode
SOFAR 60~80KTLX-G3 has 6 MPPTs, these MPPTs can work interdependently, or
divided into parallel mode. User can change the setting according to the
configuration.
9. Set Language
Set the inverter display language.
10. Set AntiReflux
Enable or disable Reflux. If disabled, the output will be the rated power. If
enable, continue to set the Reflux power, the maximum power is the rated
power. And continue to select PCC sampling points.
The reflux power value set by the anti-reflux function is the maximum power
To Next Page
Loading...
