SolarEdge Home Hub Series - User Manual

Version 1.0, October 2024
R
eplace Top of Home Hub Inverter — North America
1
SolarEdge Home Hub Single Phase Inverter Top
Only Replacement Manual — North America
Revision history
Version 1.0, October 2024; Initial release date.
Contents
Overview ....................................................................................................................................................................................................................... 1
IMPORTANT SAFETY INSTRUCTIONS ................................................................................................................................................................ 1
INSTRUCTIONS DE SÉCURITÉ IMPORTANTES ................................................................................................................................................ 2
Required equipment ................................................................................................................................................................................................ 2
Before you begin ....................................................................................................................................................................................................... 2
Test for safe voltages ............................................................................................................................................................................................... 3
Uninstall the top of the inverter .......................................................................................................................................................................... 3
Install the new top of the inverter ...................................................................................................................................................................... 5
Reinstall communications components ............................................................................................................................................................ 7
Reinstall inverter covers .......................................................................................................................................................................................... 8
Power ON the inverter ............................................................................................................................................................................................ 8
Recommission the inverter .................................................................................................................................................................................... 8
Overview
The application note explains how to replace the top part of the SolarEdge Home Hub
inverter. You must install the inverter top on the original Safety Switch to maintain
compatibility with the installed LG Chem RESU10h second generation batteries.
IMPORTANT SAFETY INSTRUCTIONS
WARNING !
Configuration of the power control settings system or changes to settings shall be
made by qualified personnel only. Incorrect configuration or setting of the power
control settings may result in unsafe conditions.
WARNING !
The controlled current settings shall not exceed the busbar rating or conductor
ampacity of any PCS controlled busbar or conductor.
WARNING !
The maximum operating currents in controlled busbars or conductors are limited
by the settings of the power control system (PCS) and may be lower than the sum
of the currents of the connected controlled power sources. The settings of the PCS
controlled currents may be used for calculation of the design currents used in the
relevant sections of NEC Article 690 and 705.

SolarEdge Home Hub Series Specifications

General

Brand	SolarEdge
Model	Home Hub Series
Category	Inverter
Language	English