Version 1.0, October 2024
Replace Top of Home Hub Inverter — North America
7
4. Verify that the AC and DC wires are correctly landed and secured with the correct torque.
5. Check that you correctly reinstalled the DC and AC cable connections with the photo.
Reinstall communications components
1. Reinstall any accessories (Home net card, Cellular modem, or Zigbee module) from the
previous unit.
2. Reconnect any external antenna cable from the previous unit.
3. Reconnect all communications connections to the DCD unit.
The connector must be connected to its designated location.
Do not force its connection.
Make sure that the connector is facing the correct position.
To Next Page
Loading...
