SolarEdge SE Series User Manual

Indication
ON/
OFF/ P
Switch
Position
LEDColor
Comment
Red Green Blue
Power
optimizers not
paired
ON (1)
OFF Blinking
S_OK: ON
No S_OK:
OFF
S_OK: ON
communication with
the monitoring
platform is
established.
Pairing Blinking Blinking Blinking
Wake-up/ Grid
Monitoring
OFF Blinking Blinking
System
Producing
OFF ON
S_OK: ON
No S_OK:
OFF
For detailed
percentage of
production, refer to
the following table.
Night mode
(no
production)
OFF Flickering
S_OK: ON
No S_OK:
OFF
Inverter is OFF
(Safe DC)
OFF (0)
OFF Blinking
S_OK: ON
No S_OK:
OFF
Inverter is OFF
(DC not safe)
Blinking Blinking
S_OK: ON
No S_OK:
OFF
Inverter
configuration
or reboot
ON / P ON ON ON
Inverter
firmware
upgrade
ON / P Alternating Alternating Alternating
The upgrade process
can take up to 5
minutes
Error Any ON
ON/ OFF/
Blinking/
Flickering
ON/ OFF /
Blinking
Refer to Errors and
Troubleshooting on
page 60
The following table describes production percentage of AC information by LED color
and ON/OFF/P switch position.
Three Phase Inverter with SetApp Configuration PN: SEXXK-XXXXIXXXX
25 Inverter and DC Safety Unit Interfaces

SolarEdge SE Series Specifications

General

Efficiency	Up to 99%
Protection Rating	IP65
Communication	Ethernet, Wi-Fi (optional), RS485
Dimensions	Varies by model
Weight	Varies by model
Rated AC Power	Varies by model
Max. DC Power	Varies by model
Model	SE Series (e.g., SE3000H, SE5000H)
AC Output Power	Varies by model
MPPT Range	Varies by model
Operating Temperature	-25°C to 60°C
Warranty	12 years standard, extendable to 20 or 25 years