P a i r i n g
T u r n S w i t c h T o O n
2.
Turn the inverter ON/OFF switch to ON within 5 seconds. If you wait longer than 5
seconds the inverter exits the pairing mode. The following message is displayed
indicating that the inverter is performing the pairing:
P a i r i n g
R e m a i n i n g [ s e c ] : 1 8 0
Three Phase System MAN-01-00507-4.2
38 Step 2: Pairing Power Optimizers to the Inverter
To Next Page
Loading...
Need help?
General