EasyManua.ls Logo

SolarEdge StorEdge SE5K-RWS - Input Battery Specifications; Installation Specifications

SolarEdge StorEdge SE5K-RWS
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ground-Fault Isolation Detection 700kΩ Sensitivity
Maximum Inverter Efficiency 98 %
European Weighted Efficiency 97.3 97.4 97.6 %
Nighttime Power Consumption < 2.5 W
INPUT BATTERY
Maximum DC Power 5000 W
Input Voltage Range 40- 62 Vdc
Maximum Continuous Input
Current
130 Adc
Battery Communication CAN, RS485 (optional)
ADDITIONAL FEATURES
Supported Communication
Interfaces
2 x RS485, Ethernet, Zigbee communications
for Smart Energy (requires antenna)
(1)
, Wi-Fi
(requires antenna)
(2)
, Built-in GSM (optional)
STANDARD COMPLIANCE
Safety IEC-62103 (EN50178), IEC-62109
Grid Connection Standards
(2)
VDE 0126-1-1, VDE-AR-N-4105, AS-4777, G83 /
G59
Emissions
IEC61000-6-2, IEC61000-6-3, IEC61000-3-11,
IEC61000-3-12
RoHS Yes
INSTALLATION SPECIFICATIONS
AC Output – Cable Gland Diameter 15 - 21 mm
Battery DCCable Gland Diameter 2 x 8-11 mm
PV DC Input 2 x MC4 pair
Dimensions (HxWxD) 853 x 316 x 193 mm
Weight 37 kg
Operating Temperature Range -40 - +60 ˚C
Cooling Internal and external fans
Noise < 50 dBA
(1)
Antenna kit for ZigBee/Wi-Fi communication should be purchased separately
(2)
For all standards refer to Certifications category in Downloads page:
http://www.solaredge.com/groups/support/downloads
StorEdge Three Phase Inverter MAN-01-00648-1.3
67 StorEdge Three Phase Inverter - Technical Specifications

Table of Contents

Related product manuals