77
Maintain the following installation distances:
50
50
[cm]
°C
20
20
Install the inverter in a vertical position.
Do not install the inverter in a horizontal or inclined position.
OK !
The optimal cooling of the inverter is only guaranteed when the cooling ns (see sec-
tion 3.5) are absolutely free of dust and dirt.
When installing the inverter on a mast, a mounting plate with at least the same
dimensions as the back of the inverter is needed.
The ambient air around the inverter must be free from dust, salt and ammonium
vapors.
The location must meet the requirements regarding electromagnetic immunity and
interference emission.
To Next Page
Loading...
