10 Troubleshooting
Sputnik Engineering delivers only SolarMax inverters which have stood up to our ex-
tensive quality testing regime. Moreover, each inverter is subjected to several hours of
endurance testing under full-load conditions.
If, despite this, your PV plant suffers a failure or an error we recommend these proce-
dures:
DANGER
Work on the PV plant must be performed by qualied electricians only.
1. Check whether the inverter and PV generator have been installed correctly. Check the
cable connections using the instructions and information contained in the “Installa-
tion” section of this manual.
2. Determine the cause of the failure by checking the message in the graphics display.
The chapter “Diagnosis & measures”; page 102 explains possible ways of correcting
failures.
If you cannot correct the failure using the recommended measures, or you are not sure
what sort of error is involved, please contact our SolarMax Service Centre.
To Next Page
Loading...
