Notes on this ManualContents
03
02
Note: “X1” means single phase; "MINI" means MINI series; "K"
means kW; "G4" means 4th generation.
Keep this manual at where is accessible all the time.
1.1 Scope of Validity
1 Notes on this Manual
This manual is an integral part of X1 Series. It describes the assembly,
installation, commissioning, maintenance and failure of the product.
Please read it carefully before operating.
1.2 Target Group
1.3 Symbols Used
This manual is for qualified electricians. The tasks described in this
manual can only be performed by qualified electricians.
The following types of safety instructions and general information
appear in this document as described below:
DANGER!
“Danger” indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING!
“Warning” indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION!
“Caution” indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTE!
“Note” provides tips that are valuable for the optimal
operation of your product.
7 Troubleshooting
7.1 Troubleshooting
7.2 Routine Maintenance
8 Decommissioning
8.1 Dismantling the Inverter
8.2 Packaging
8.3 Storage and Transportation
80
80
84
85
85
85
85
9 Disclaimer
86
* Warranty registration form
X1-MINI-0.6K-G4 X1-MINI-0.7K-G4 X1-MINI-1.1K-G4 X1-MINI-1.5K-G4
X1-MINI-2.0K-G4 X1-MINI-2.5K-G4 X1-MINI-3.0K-G4 X1-MINI-3.3K-G4
To Next Page
Loading...
Need help?
General
