WARNING!
• NEVER remove any cover without first disconnecting AC power supply.
• If A.C. voltage varies by ten percent (10%) or more, the performance of your elliptical
may be affected. Such conditions are not covered under your warranty. If you suspect
the voltage is low, contact your local power company or a licensed electrician for proper
testing.
• NEVER expose this elliptical to rain or moisture. This product is NOT designed for use
outdoors, near a pool or spa, or in any other environment that may cause the machine to
get wet. The maximum operating temperature specification is 40 degrees C (104 F), and
humidity is 95% non-condensing (no water drops forming on surfaces).
This product must be grounded. If the E35's electrical system should malfunction or
breakdown grounding provides a path of least resistance for electric current, reducing the
risk of electric shock. This product is equipped with a cord having an equipment-grounding
plug. The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in
a risk of electric shock, Check with a qualified electrician or serviceman if you are in
doubt as to whether the product is properly grounded. Do not modify the plug
provided with the product if it will not fit the outlet; have a proper outlet installed by a
qualified electrician,
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like
the plug illustrated below. A temporary adapter that looks like the adapter illustrated below
may be used to connect this plug to a 2-pole receptacle as shown below if a properly
grounded outlet is not available. The temporary adapter should be used only until a properly
grounded outlet, (shown below) can be installed by a qualified electrician. The green colored
rigid ear-lug, or the like, extending from the adapter, must be connected to a permanent
ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must
be held in place by a metal screw.
Grounded Outlet
Adapter
/
Grounding Pin
Grounded Outlet Box
Screw
Tab of
Grounding
Screw
4 E25 / E35 Elliptical
To Next Page
Loading...
