SOLIS S6-EH3P5K-H - User Manual

59 pages

To Next Page

User Manual

for S6 Series Hybrid Inverter

Version 1.2, Release Date: 04,2023

Applicable models

S6-EH3P5K2-H

S6-EH3P6K2-H

S6-EH3P8K2-H

S6-EH3P10K2-H

S6-EH3P3K-H-EU

S6-EH3P4K-H-EU

S6-EH3P5K-H-EU

S6-EH3P6K-H-EU

S6-EH3P8K-H-EU

S6-EH3P10K-H-EU

S6-EH3P10K-H-EU-BE

Applicable System

Three phase system

Other manuals for SOLIS S6-EH3P5K-H

Manual50 pages

Questions and Answers

E
Eric AllenSep 22, 2025
Why is my SOLIS S6-EH3P5K-H Inverter showing OV-ILLC (1052 DATA:0000) error?
- B
  Brian Smith PhDSep 22, 2025
  The OV-ILLC (1052 DATA:0000) error on your SOLIS Inverter may indicate that the backup load is overloaded. Check whether the backup load is overloaded. If the issue persists, restart the system.
A
Amanda HernandezSep 22, 2025
What to do if my SOLIS S6-EH3P5K-H displays Fan Alarm?
- I
  ibarnesSep 22, 2025
  If your SOLIS Inverter shows a Fan Alarm, check if the internal fan is working correctly or if it is jammed.
R
Regina RodriguezSep 23, 2025
What does OV-Vbatt mean on my SOLIS Inverter?
- M
  Michael SmithSep 23, 2025
  The OV-Vbatt error on your SOLIS Inverter indicates an over-voltage issue with the battery. Verify the battery voltage is within the specified standards. Measure the battery voltage at the inverter connection point. If the problem continues, contact your battery manufacturer.
B
benjamintaylorSep 23, 2025
What to do if SOLIS S6-EH3P5K-H Inverter shows DSP COM Fail?
- J
  Jacqueline RiveraSep 23, 2025
  If your SOLIS Inverter is showing a DSP COM Fail error, restart the inverter.
J
Jake GrantSep 23, 2025
What to do if SOLIS S6-EH3P5K-H shows Battery BMS Alarm?
- M
  Mary HubbardSep 23, 2025
  If your SOLIS Inverter is showing a Battery BMS Alarm, restart the battery.
S
Susan AlvarezSep 23, 2025
What to do if my SOLIS S6-EH3P5K-H shows 'Off'?
- C
  Christopher AbbottSep 23, 2025
  If your SOLIS Inverter is off, turn on the device using the ON/OFF setting.
D
Donald JohnsSep 23, 2025
What to do if SOLIS Inverter displays Surge Alarm?
- C
  cheathSep 23, 2025
  In case of a surge alarm, it indicates a grid side fault. Restart the device. If the alarm persists, contact the manufacturer's customer service.
C
Crystal AbbottSep 23, 2025
What to do if my SOLIS S6-EH3P5K-H displays ARC- FAULT (1041 DATA:0000)?
- H
  hurstmarySep 23, 2025
  If your SOLIS Inverter shows the ARC- FAULT (1041 DATA:0000) error, verify that all connections within your PV system are tight. If further adjustments are necessary, arc fault settings can be changed in the advanced settings.
G
Garrett MossSep 23, 2025
What does OV-DC01 (1020 DATA:0001) error mean on my SOLIS S6-EH3P5K-H Inverter and how can I fix it?
- M
  Matthew CarrilloSep 23, 2025
  The OV-DC01 (1020 DATA:0001) error on your SOLIS Inverter indicates that the PV voltage might be abnormal. Check if the PV voltage is within the normal range. Restart the system to see if the fault continues.
L
larsontimothySep 23, 2025
What to do if my SOLIS S6-EH3P5K-H displays DCInj-FAULT (1037 DATA:0000)?
- A
  allenronaldSep 23, 2025
  If your SOLIS Inverter displays DCInj-FAULT (1037 DATA:0000), confirm that the grid is not abnormal and that the AC cable connection is secure. If both are fine, restart the system to see if the fault persists.

SOLIS S6-EH3P5K-H Specifications

General

Model	S6-EH3P5K-H
Type	Hybrid Inverter
Max. Input Voltage	600 V
Number of MPPTs	2
AC Voltage Range	180-280V
THDi	<3%
Nominal Grid Frequency	50/60Hz
MPPT Efficiency	99.9%
DC Switch	Yes
Protection Degree	IP65
Protection Class	I
Operating Temperature Range	-25°C to +60°C
Cooling Method	Natural Convection
Rated Power	5000 W
Max. DC Input Power	7500 W
Rated AC Output Power	5000 W
Max. AC Apparent Power	5500 VA
Nominal AC Voltage	230 V
Power Factor	0.8 leading to 0.8 lagging
Grid Frequency Range	45 Hz - 55 Hz / 55 Hz - 65 Hz
Communication	RS485