User Manual
6.6.2 Running Message
This function is for maintenance person to get running message such as internal temperature,
Standard No.1,2,etc.
Screens can be scrolled manually by pressing the UP/DOWN keys.
6.6 Advanced Info - Technicians Only
NOTE
To access to this area is for fully qualified and accredited technicians only.
Enter menu “Advanced Info.” and “Advanced settings” （need password）.
Select “Advanced Info.” from the Main Menu. The screen will require the password as below:
YES=<ENT> NO=<ESC>
Password:0000
Figure 6.5 Enter password
1. Alarm Message
2. Running message
3.Version
4. Daily Energy
5. Monthly Energy
6. Yearly Energy
7. Daily Records
8. Communication Data
9. Warning Message
6.6.1 Alarm Message
The display shows the 100 latest alarm messages (see Figure 6.6). Screens can be scrolled
manually by pressing the UP/ DOWN keys. Press the ESC key to return to the previous menu.
Alm000: OV-G-V
T: 00-00 00:00 D:0000
Figure 6.6 Alarm Message
The default password is “0010". Please press “down” to move the cursor, press “up” to
select the number.
After enter the correct password the Main Menu will display a screen and be able to access
to the following information.
6. Normal operation
39
To Next Page
Loading...
Need help?
General