Getting Started
1-14
SolSensor Specifications
Table 3. SolSensor specifications
Silicon photodiode with corrections for temperature,
spectral, and angular effects
Typically, ±2% when used to predict the
performance of well characterized poly- and
monocrystalline PV modules with direct irradiance
>600W/m
2
. Contact Solmetric Application
Engineering for more information on accurate
irradiance measurements.
0.1 s (Measurement bandwidth approximately
10 Hz)
Type K thermocouple. Two inputs.
Typically, less than 2C including inherent
thermocouple limitations and assuming SmartTemp
0 – 90 deg from horizontal
±2 deg typical (0-45 deg)
Measurement synchronization with
I-V curve
Wireless range (open line of sight)
SolSensor 300/300V2: 100m
Operating temperature range