!
!i
The Base contains many
electrical and mechanical parts
and must be cared for to prolong
life.
As a general rule of thumb, here
are do’s and don’ts.
DO clean the Base by lightly
wiping with a damp cloth.
DO remove the Base from the
tripod after each use.
DO consistently update to the
latest software to optimize the
Base.
DO rinse your Tag and armband
in fresh water after contact with
saltwater.
DO clean the lens with a
microfiber cleaning cloth.
DO NOT submerge the Base and
Camera underwater. They are not
water resistant.
DO NOT stick any foreign objects
between the tilt and main
structure of the Base.
DO NOT manually pull the lens
out of the camera. Attempting to
do so will damage the motors.
DO NOT manually force the Base
to tilt or pan.
DO NOT attempt to open the
Base to troubleshoot. This will
void your warranty.
DO NOT keep cables plugged in
during device calibration.
HDMI Out
Maintenance
i
Output and Video Playback for TVs and Monitors
• The Base outputs uncompressed video from the Optic65 and Optic25
Cameras at 720p60.
• HDMI out is available anytime Camera Preview is available on the Base.
• Micro HDMI cable is required.
• The color space of the HDMI output is RGB.
To avoid damage, remove all
cables prior to and during
calibration as the Base spins.
WARNING
Audio and Hot Shoe Mount
i i
Audio Compression: AAC 48KHz (128Kbit/s)
Internal Mic: Mono, Digital
External Mic: Analog, Stereo (3.5mm plug)
Remote Wireless Mic: Supported (purchased separately)
The hot shoe can be used to
mount an external mic and will
accommodate future
SOLOSHOT accessories.
USER MANUAL 22 SOLOSHOT.COM
To Previous Page
Loading...
