Solplanet SOL APOLLO Series - Symbols on Label; Basic Safety Protection

UM0027_ SOL APOLLO Series 7.4-22K_EN_V02_0523 9
2.4 Symbols on label
Symbol
Explanation
Risk of danger, warning and caution！
Safety information, important for human safety. Failure to
observe the safety information in this manual may result in
injury or death.
Be ware of high voltage and operating current.
The EV charger operates at high voltage and current. Work
on the EV charger must only be carried out by skilled and
authorized electricians.
Certified safety.
The product is TUV-tested and complies with the
requirements of the EU Equipment and Product Safety Act.
CE mark.
The EV charger complies with the requirements of the
applicable CE guidelines.
Do not dispose of the EV charger with household waste.
For more information on disposal, please refer to Section 10
“Recycling and disposal”.
Refer to the manual accompanying the EV charger.
2.5 Basic safety protection
The EV charger provides the following safety protection functions:
1) Over-voltage, under-voltage protection;
2) Over-frequency, under-frequency protection;
3) Over-current protection;
4) Residual current monitoring;
5) Grounding conductor monitoring;
6) Relay fault monitoring;
7) Phase lost monitoring;
8) Over-temperature monitoring.