UM0027_ SOL APOLLO Series 7.4-22K_EN_V02_0523 53
7 Cleaning and Maintenance
Normally, the EV charger requires minimal maintenance with no need for cali-
bration. It is good practice to regularly inspect the EV charger and the cables
for visible damage. Disconnect the EV charger from all power sources before
cleaning with a soft cloth.
The charging cable must be regularly checked for any damage or deteriora-
tion.
Figure 47
Risk of injury due to hot enclosure!
• The enclosure temperature may exceed 50 during operation. Do not
come into contact with the EV charger during operation.
• Wait approx. 10 minutes before cleaning until the enclosure is cool
enough to touch.
• Ground yourself before touching any component.
To Next Page
Loading...
